FPS Push-Lite Series Race Hose is manufactured to the same rigorous standards of our 3000 Series Stainless Race Hose, the Push-Lite Hose is the perfect alternative when cost or weight is the main consideration. 250 PSI maximum working pressure allows for most automotive water, oil, and fuel system applications.  Inner layer of synthetic PKR, covered with a fiber braid reinforcement, and wrapped with a weather resistant fiber cover. Temperature range to 300F. Almost half the weight of the comparable stainless braided hose. Designed for use with the 8000 Series Push On fittings. We highly recommend the lightweight stainless hose clamp for high heat or high pressure applications. (See Tools & Accessories page.

.

8000 Series Push-Lite may be used in any number of automotive applications. If you are attempting to use other than our 8000 Series fittings, be certain to measure the hose barb diameter to determine the suitability. This hose is sized closer to the fractional dimensions associated with standard automotive hose, but the suitability is at the sole determination of the user. AN SIZE NOM. I.D. Bulk PER FT. 10 FT. ROLL 20 FT. ROLL -4 1/4" 800004 810004 820004 -6 3/8" 800006 810006 820006 -8 1/2" 800008 810008 820008 -10 5/8" 800010 810010 820010 -12 3/4" 800012 810012 820012   Part Number Auto Hose Size Push-Lite Designation Nominal I.D. Max. Working Pressure Vacuum Rating Weight Per FT 800004 1/4" #4 .255" 350 psi. 28 in. hg. 0.09 lbs 800006 3/8" #6 .379" 300 psi. 28 in. hg. 0.11 lbs 800008 1/2" #8 .507" 300 psi. 28 in hg. 0.18 lbs 800010 5/8" #10 .632" 250 psi. 15 in. hg. 0.19 lbs 800012 3/4" #12 .757" 250 psi. 15 in. hg. 0.24 lbs

You can submit questions with this link:

This document maintained by tech@patriotracingusa.com.
Material Copyright © 1998 {Your Name}